Chamber Reamers / Gauges / Cutters

Our Chamber Reamers are individually hand-stoned to cut smooth and chatter free. Made to SAAMI specifications or custom specifications for standardized cartridges and to the current industry standard for popular wildcat cartridges.

Chamber Reamers / Gauges / Cutters   Choose a subcategory, or scroll down for more products.

Subcategories

  • Chamber Reamers

    A) This is our Premium Chamber Reamer with a Precision Ground Bushing held by the appropriate 4-40 screw head. Hand stoned to ream the finest chamber finish possible, we're not kidding when we say it's the most accurate chamber reamer on the market. All prints are finalized by Dave Kiff.

    B) With the addition of a precision grooved screw for maximum coolant flow when using muzzle flush, this Premium HSS Chamber Reamer is designed to streamline the chambering process. Simply add any Premium HSS Chamber Reamer to cart and request oil grooves to be added to the screw. Adds $9.00 to total cost.

    C) Comparable to Brownell's Premium Chamber Reamers, these reamers are hand stoned and ground to perfection with the addition of a C-Clip to hold the bushings in place. Just select any Solid Pilot in the caliber you need, and we precision grind it for a removable bushing (Add $25.00).

    D) Used by Gun / Pistol smiths all over the world, this Solid Pilot Chamber Reamer is designed to get the job done on a budget.

    E) Just like the Premium Chamber Reamers, Solid Pilots can be configured for muzzle flush as well. Add precision grooved screws as a customization and we do the rest.

    **NOTE:
    WE STOCK THE SAAMI, CIP & NATO PISTOL, RIFLE & GAS GUN CALIBERS IN MATCH GRADE AND PRODUCTION TOLERANCES. MATCH GRADE IS +.0004 FROM SAAMI MINIMUM. PRODUCTION SIZES ARE +.001 to +.0015 OVER SAAMI MINIMUM. CHROME LINED CHAMBERS ARE USUALLY +.0018 TO +.002 ON RIFLES AND +.004 ON PISTOLS & HAND GUNS OVER SAAMI MINIMUM TOLERANCES. WE ALSO STOCK CARBIDE 60' CENTER REAMERS, AR BREECH TOOLS ALONG WITH OUR -.009 THREE FLUTE ROUGHER WITH CHIP BREAKER AND FINISH BREECH & ROUGHER COMBINATION REAMERS. PLEASE CALL AND TALK TO DAVE KIFF ABOUT OUR NEW FINISH BREECH / ROUGHER COMBINATION TOOL; ALONG WITH OUR NEWLY PATIENTED DESIGN FINISH/ROUGHER BREECH ALL IN ONE COMBINATION TOOL THAT WILL CHAMBER THE COMPLETE CAVITY OF THE BARREL IN ONE FORWARD MOTION SAVING THOUSANDS OF DOLLARS IN CHAMBERING TIME AND EXTRA TOOLS.

  • SAAMI II Reamers

    All SAMMI II chamber reamers are held to maximum SAMMI throat lengths @ + .015 with a + .005 – 0 tolerances. No other change to avoid problems with some extra-long factory and hand loaded ammo. All standard SAMMI reamers are ground to SAMMI minimum specs +.0004 on diameter and +.005 on length. Production carbide SAMMI reamers are held to + .001 to .0015 over min for longevity.

  • Pull-Through Chamber Reamers
  • Bushings
  • Gauges
  • Throat and Neck Reamers
  • Muzzle Brake Reamers
  • Rifle Bolt Raceway Reamers
  • Replacement Reamer Rings and Screws
  • Bore Reamers
  • Scope Ring Alignment Reamers
  • Sight Screw Counterbores
  • Barrel Counterbores
  • Barrel Breech Tools
  • Barrel Crown Tools
  • Shotgun Form Tools
  • Barrel Fluting Cutters
  • Slot and Groove Cutters
  • Revolver Forcing Cone Cutters
  • Gunsmithing Lathe Bits
  • Piloted Core Drills
  • Precision Tooling
  • Cutting Fluid
  • Center Lube
  • FX Paint Cartridge Combat Training Chamber Reamers
  • Rifling Cutters
  • PTG Prints
  • CIP II Reamers
Showing 1 - 3 of 3 items
Showing 1 - 3 of 3 items