NOTE: this is not a standard (SAAMI / CIP) Chamber Reamer. The Reamer will be manufactured to your order.
Pacific Tool and Gauge cannot change, cancel or refund an order for a non-standard Reamer.
If you have questions, please call us at (541) 826-5808.
Check Indiana Regulations
Please Select Reamer Type:
Reamers are available in Carbide for production run needs:
Please contact a sales associate if you have any questions or if you would like to order a carbide reamer.
Rougher is -.009 thou, unless noted.
10 Item Items
Items in stock ship within 7 days. If not in stock, this item is custom made to order.
The .358 Hoosier II is an incremental improvement over the .358 Hoosier, featuring a longer barrel throat. 1.8 Rule
Our Chamber Reamers are individually hand-stoned to cut smooth and chatter free. Made to SAAMI specifications or custom specifications for standardized cartridges and to the current industry standard for popular wildcat cartridges. All HSS reamers have a 3/8" square drive shank. Carbide reamers feature a .4375" cylindrical shank. We can grind a square drive on a carbide reamer, but we do not recommend driving a carbide reamer with square drive - the carbide tends to chip and/or shatter. Premium reamers feature removable pilots that are held in place with a screw. Premium reamers include one bushing of nominal bore diameter.
NOTE: All PTG Reamers and Cutting Tools are designed to work with petroleum-based lubricant. Water-based lubricant can give acceptable results, however the life of the tool will be reduced. For best results use petroleum-based lubricant.