Menu
- Chamber Reamers / Gauges / Cutters
- Chamber Reamers[nopix]
- New Additions [nopix]
- Custom Chamber Reamers [nopix]
- Shotgun Chamber Reamers[nopix]
- 10 Cal - 199 Cal Chamber Reamers [nopix]
- 20 Cal - 219 Cal Chamber Reamer [nopix]
- 22 Cal - 239 Cal Chamber Reamer [nopix]
- 24 Cal - 249 Cal Chamber Reamer [nopix]
- 25 Cal - 299 Cal Chamber Reamer [nopix]
- 30 Cal - 339 Cal Chamber Reamer [nopix]
- 340 Cal - 399 Cal Chamber Reamer [nopix]
- 40 Cal + Chamber Reamers [nopix]
- 3 mm - 5.9 mm Chamber Reamers [nopix]
- 6 mm - 6.9 mm Chamber Reamers [nopix]
- 7 mm - 7.9 mm Chamber Reamers [nopix]
- 8 mm - 9.9 mm Chamber Reamers [nopix]
- 10 mm + Chamber Reamers[nopix]
- Chamber Reamer
- SAAMI II Reamers
- Pull-Through Chamber Reamers[nopix]
- Bushings
- Custom Bushing For Chamber Reamers
- Single Bushing For Chamber Reamers and Barrel Tools[nopix]
- Bushing Sets For Chamber Reamers and Barrel Tools[nopix]
- Action Blueprinting Bushings[nopix]
- 705 Series Bushings
- 708 Series Bushings
- 710 Series Bushings
- 712 Series Bushings
- 715 Series Bushings
- Bushing Adapters for Chamber Reamers
- Shotgun Bushings
- Storage Tubes
- Gauges
- Headspace Gauges (SAAMI, CIP, Wildcat)
- Firing Pin Indent Gauges [nopix]
- Function Gauges [nopix]
- Proof House Gauges
- Case Gauges & Kits
- Muzzle Erosion Gauges
- Throat Erosion Gauge
- Rim Discs
- Throat and Neck Reamers
- Muzzle Brake Reamers[nopix]
- Rifle Bolt Raceway Reamers
- Replacement Reamer Rings and Screws
- Bore Reamers [nopix]
- Scope Ring Alignment Reamers[nopix]
- Sight Screw Counterbores
- Barrel Counterbores
- Barrel Breech Tools
- Barrel Crown Tools
- Shotgun Form Tools
- Barrel Fluting Cutters[nopix]
- Slot and Groove Cutters
- Revolver Forcing Cone Cutters
- Gunsmithing Lathe Bits
- Piloted Core Drills[nopix]
- Precision Tooling
- Carbide Drills & End Mills
- Carbide End Mills
- 2 Flute - Single End Square Carbide Mill Cutters[nopix]
- 2 Flute - Double End Square Carbide Mill Cutters[nopix]
- 2 Flute - Single End Ball Nose Carbide Mill Cutters[nopix]
- 2 Flute - Double End Ball Nose Carbide Mill Cutters[nopix]
- 4 Flute - Single End Square Carbide Mill Cutters[nopix]
- 4 Flute - Double End Square Carbide Mill Cutters[nopix]
- 4 Flute - Single End Ball Nose Carbide Mill Cutters[nopix]
- 4 Flute - Double End Ball Nose Carbide Mill Cutters[nopix]
- Carbide Drill Mills
- Carbide End Mills
- Drill Countersinks[nopix]
- Boring Bars[nopix]
- Dovetail Cutters
- Center Reamers
- Carbide Drills & End Mills
- Cutting Fluid
- Center Lube
- FX Paint Cartridge Combat Training Chamber Reamers[nopix]
- Rifling Cutters
- PTG Prints
- CIP II Reamers
- Chamber Reamers[nopix]
- Gunsmithing Tools / Jigs & Fixtures
- AR Tools
- Everything 1911
- Receiver Raceway Gauge Pins
- Action - Bolt Blueprinting
- Bolt Handle Jigs
- Precision Bore & Chamber Check Gauges
- Lathe Jigs & Kits
- Mandrels & Truing Bars
- Misc. Gunsmith Tools / Accessories
- Recoil Lug Fixtures & Tools
- Reloading Tools
- Reamer Parts, Tools & Stops
- Reamer Holders
- Reamer / Cutter Handles
- Punches
- Bedding Columns & Compounds
- 1911 Tooling and Fixtures
- GTR Tooling and DVD's
- 80% Lower Milling Jigs
- Barrel Shank Tension Nut
- Bolt / Action Truing Kits
- Muzzle Brakes
- Misc Accessories
- Scopes, Mounts, and Picatinny Rails
- Thread Protectors
- Slings & Bag Swivel Stud
- Manufacturer Parts and Tools
- Actions, Bolts, Bottom Metal and Magazines
- Sale Items
- Information / Downloads
View larger 
1.5" AR15, 308 DPMS Top Rail (Post 8/09)
e4b6c67a 2435
New product
In stock: 4 available.
More info
NOTE: Screws are not included with this product.
1.5" Top Rail mounts to our AR10 ArmaLite & 308 DPMS-PRE 8/2009 Handguard Systems.
The distance from the barrel's centerline to the top of the receiver rail is 1.313''
Over-all length: 1.5''
Weight with hardware: .3 oz.
Mounts to the top of ALL AR10 ArmaLite & 308 DPMS-PRE 8/2009 models. THESE ONLY MOUNT TO THE 12 O'CLOCK POSITION.
Secures to the handguard using flush fitting, flat head screws and is designed to mount a backup iron sight without excess rail length/weight
MIL-STD 1913 Picatinny rail specifications
MIL-SPEC hard anodized aluminium, matte finish
Hardware nitride coated to resist corrosion in 500 hour salt spray tests
Top Rail and hardware are made in the USA
Weight with hardware: .3 oz.
Mounts to the top of ALL AR10 ArmaLite & 308 DPMS-PRE 8/2009 models. THESE ONLY MOUNT TO THE 12 O'CLOCK POSITION.
Secures to the handguard using flush fitting, flat head screws and is designed to mount a backup iron sight without excess rail length/weight
MIL-STD 1913 Picatinny rail specifications
MIL-SPEC hard anodized aluminium, matte finish
Hardware nitride coated to resist corrosion in 500 hour salt spray tests
Top Rail and hardware are made in the USA