Aluminum

Note: There is a $5.00 charge for colors. Available in Black, Red and Blue

$89.00

$94.00 <-- Colors

Aluminum

Note: There is a $5.00 charge for colors. Available in Black, Red and Blue

$89.00

$94.00 <-- Colors

Custom Bolt Shrouds (Min. Order 25 pcs)**

**Customer to supply print and specifications - Click Here to Email

CALL FOR QUOTE

$21.99 ← Steel

$32.00 ← Stainless

XP-100 Aluminum Firing Pin .062

Badger Lapua/Rigby Based Calibers Ext. Kit**

**If purchased with a Remington Military Replacement Bolt - Price is $19.95

$33.00

$19.95**

Badger Mag Calibers Extractor Kit**

**If purchased with a Remington Military Replacement Bolt - Price is $19.95

$33.00

$19.95

Remington 700 Bolt Face Truing Cutter Guide STD 1-1/16" x 16 Thread

Bolt Face Truing Cutters (goes with product listed above - 947969), Specify type and product # when ordering.

790524 - 223 Bolt Face Burr

196742 - 308 Bolt Face Burr

413782 - PPC Bolt Face Burr

369274 - Lapua/Rigby Bolt Face Burr

712896 - Magnum Bolt Face Burr

Remington 700 Bolt Lug Lapping Tool

Bolt locking lugs cam and lock into corresponding lug recesses in the receiver as the bolt is closed. For the smoothest operation of the bolt and utmost accuracy, both lugs should be smooth and in full contact with the corresponding lug recesses. In factory production rifles and in surplus military rifles, this is the exception, rather than the rule. Before final headspacing, simply thread this tool into the receiver threads, apply lapping compound to the bolt lugs, then open and close the bolt to lap the lugs smooth and into perfect contact with the lug recesses.

Technical Information

Material: Tool Steel Notes: Increases accuracy by allowing the user to lap the bolt lugs to insure that both lugs are bearing evenly on their recesses. Screws into receiver threads (barrel must be removed) 600 grit polish is applied to the bolt lugs and the bolt closed against the spring loaded center pilot of the tool. Raising and lowering the rifle's bolt repeatedly will polish the lugs for a better, more crisp feel. Must be done before final headspacing

Remington 700 Long Action Single Shot Follower

Bench rest followers are perfect for competitors, varmint hunters or anyone trying to get the most accuracy possible out of their bolt action rifle. They epoxy in place and allow for simple single shot operation.

Technical Information

Material: Aluminum Finish: Silver

Features: Stiffens action and offers a loading platform for single feeding Gunsmithing Required: No Notes: May need minor fitting to action cutout May be epoxied in place if intended as a permanent modification Short action 2.937" long 1.2oz, Long action 3.784" Long 1.6oz Fits 308, 30 06 to magnum.

Remington 700 Short Action Single Shot Follower

Bench rest followers are perfect for competitors, varmint hunters or anyone trying to get the most accuracy possible out of their bolt action rifle. They epoxy in place and allow for simple single shot operation.

Technical Information

Material: Aluminum Finish: Silver

Gunsmithing Required: Yes

Notes: May need minor fitting to action cutout May be epoxied in place if intended as a permanent modification Short action 2.937" long 1.2oz, Long action 3.784" Long 1.6oz For 223 to magnum cartridges.

Remington 700 Thread Protector

Remington 700 Trigger Group Bedding Block

Polymer block replaces the trigger group when bedding a barrel, avoiding the need to wrap the trigger group or fill with clay. Coat the block with release agent before bedding to ensure easy removal with no mess.

Technical Information

Notes: Delrin construction This tool is used to keep glass bedding compound out of your stock when bedding your gun Dimensions:( W x H x Thickness) 1.5" x 2.25" x 29/64"

Remington 700 Extractor Rivet Anvil

This Extractor Rivet Anvil is specially designed for Remington 700’s. Slide this hardened steel anvil into the face bolt recess, and it will support the back side of the extractor rivet while "peening" the other end to install a new extractor. Works great if clamped in a vise.

Remington 870 Rivet Staking Punch Set 2-Piece

Make fitting the ejector spring housing of a Remington 870 easy with these specially designed punches. One tool fastens the ejector housing to the lower portion of the rivet, the other fits the upper part of the rivet to hold the ejector spring in the ejector housing.

Technical Information

Notes: Fastens ejector housing to lower portion of the rivet, then fits the upper part of the rivet to hold the ejector spring in the ejector housing.

Remington Bolt Face Truing Cutter Guide 1-1/16" x 16 Thread .010 Oversize

Bolt Stop

NOTE: This is not a kit. Installation instructions NOT included.

Spiral Grind Remington Factory Bolts

Send in your Remington Bolt! We will spiral grind any Remington Factory Bolt.

Knob Installation

We will thread and install any of the following knobs on your Remington Bolt.

We will manufacture custom knobs (Min. Order 25 pcs)! Please send in your blueprint.

Round Knurled

Teardrop Knobs

Tactical Knobs

Round Knob