Pistol & Revolver Performance Parts

 

May 6, 2011 10:06 AM

 

Description
Product #
Price

Adjustable Extractor Support Removal Tool 38 Special and 357 Magnum

 

170643

Adjustable Extractor Support Removal Tool 38 Special and 357 Magnum

$28.99
Adjustable Extractor Support Removal Tool 44 and 45 Calibers

297893

Adjustable Extractor Support Removal Tool 44 and 45 Calibers

$28.99

Baker Hammer, Sear Pin Block Kit

Precision-machined block holds the hammer and sear pin as they would sit in the trigger group, allowing engagement surfaces to be observed. Ideal for all kinds of trigger work. Kit includes the block and all pins listed.

Technical Information

Notes: Allows positioning of the hammer and sear for observing the engagement point between them. Dovetail adjustment block moves in slotted channel for pin positioning. Allen screw locks the pin setting. Block is steel, pins are stainless steel Includes block, and a set of hammer and sear pin for the following firearms: 1911, Colt Single Action Army, Uberti Cattleman, Ruger 10/22, Ruger New Model Single Action, Ruger Mark 2, Browning Hi Power, AR-15 small pin .154", AR-15 large pin .172".

970388

Baker Hammer, Sear Pin Block Kit

$126.99

Barrel Alignment Block 1911

This steel block features a milled slot to hold a 1911 barrel in its slide for fitting the barrel hood to the bolt face slot. The block is meant to fit between the slide rails to help prevent barrel twisting, and may require minor fitting.

Technical Information

Notes: Steel, 2" x 3/4" x 1/2" Milled slot holds the barrel in the slide for fitting the hood to the bolt face slot. Fits between the slide rails preventing barrel twist May require minor fitting

722244

Barrel Alignment Block 1911

$28.99
Barrel Bushing Expander Set 1911

513609

Barrel Bushing Expander Set 1911

$78.99

Barrel Bushing Fitting Mandrel 1911

Bushing installs between 2 halves of the mandrel and can be easily turned down in a drill press or lathe.

749359

Barrel Bushing Fitting Mandrel 1911

$58.99
Barrel Cylinder Alignment Gauge Handle

825728

Barrel Cylinder Alignment Gage Handle

$11.99

Barrel Set Back Fixture

Fit new barrels, or set back existing barrels to adjust barrel to cylinder gap using this solid steel barrel set back fixture. Can be used without a lathe.

Technical Information

Notes: Fit new barrels or set back existing barrels to adjust barrel to cylinder gap. May be used without a lathe. Steel.

954970

Barrel Set Back Fixture

$148.99

Bushing Tool Colt Double Action Revolver

This tool easily slides over the ejector rod to reach the crane bushing for removal without damage in Colt revolvers. For use on Python, Trooper, Officer’s Model, Official Police, Marshal, Cobra, Agent, Police Positive, Detective Special and Pocket Positive.

171014

Bushing Tool Colt Double Action Revolver

$24.99
Cone Throating Reamer with T-Handle Kit .22 to .45 Caliber 11 Degree
Cone Throating Reamer with T-Handle .22 to .45 Caliber
$55.00
Cone Throating Reamer with T-Handle Kit 10 Degree

812154

Cone Throating Reamer with T-Handle 10 Degree

$55.00

Disconnect Scraper 1911

Hardened steel scraper deepens the disconnector notch to allow proper function.

Technical Information

Notes: Designed to cut the disconnector notch deeper so the disconnector won't hit the slide. Steel scraper with plastic handle, approximately 5" long.

290788

Disconnet Scraper 1911

CALL

Ejector Rod Housing Arbor Ruger, Colt Single Action

Hold ejector rod housing securely to the lathe with this steel arbor. Designed with an Allen screw head to help keep the ejector rod square during cutting. Great for trimming to the right length.

Technical Information

Notes: Steel, 1/4" diameter, 5 1/16" long Holds ejector rod housing when cutting to a different length Allen screw head fits into hole in housing, prevents rotating when cutting the housing shoulder.

690464

Ejector Rod Housing Arbor Ruger, Colt Single Action

$9.99

Grip Bushing Staker 1911

The correct tool for staking 1911 grip bushings. Tool accepts 1/8" punch and holds it in the correct position for staking.

563977

Grip Bushing Staker 1911

$23.99

Hammer Slot Stone 1911

This India stone is sized to fit inside the 1911 hammer slot. .300" x .500" x 6".

Technical Information

Notes: Ceramic, .300" square, 5" long Smooths inside surface of 1911 frame where hammer rides on frame surface

569769

Hammer Slot Stone 1911

$11.99

Hammer Squaring File 1911

File is precision-ground with 2 safe sides for a perfect hammer hook angle.

Technical Information

Notes: 5" long, tapers from .185" to .180" Two sided square file for cutting precise 90 degree hammer hook angle.

291157

Hammer Squaring File 1911

$33.99

Hammer Stop Block 1911

Block slides onto rails to facilitate testing of the hammer and trigger without the slide in place. Avoids damage that otherwise might result from dropping the hammer without the slide in place.

Technical Information

Notes: Aluminum with nylon pad Fits into frame rails so hammer can be used with slide off frame

936014

Hammer Stop Block 1911 936014

$33.99
Interchangeable Pilot Muzzle and Cylinder Chamfering and Crowning Cutter Handle

143522

Interchangeable Pilot Muzzle and Cylinder Chamfering and Crowning Cutter Handle

$11.99

Lug Iron 1911

This tool is useful for removing the ridges and wear marks from a 1911 slide's lug area. At 9" long with a large plastic handle, this tool provides plenty of leverage for the task at hand.

Technical Information

Notes: Steel shaft and head, plastic handle Approximately 9" long Head removes ridges and wear marks from the slide lug area.

821643

Lug Iron 1911

CALL

Magazine Lip Forming Tool 1911 45 ACP

Tool gently reforms 1911 magazine feed lips to more reliably accept 45 ACP wadcutter ammunition.

Technical Information

Notes: Reforms magazine feed lips to better feed wadcutter ammunition Steel

721582

Magazine Lip Forming Tool 1911 45 ACP

$82.99

Magazine Well Filler Extended 1911

Aluminum fixture inserts into the magazine well, preventing the frame from being crushed when clamped in a vise.

Technical Information

Notes: Aluminum Fits inside the magazine well area to protect frame from damage when frame is held in a vise

769908

Magazine Well Filler Extended 1911

$28.99

Mainspring Compressor Ruger, Colt, S&W, Taurus, H&R Revolvers with Coil Mainspring

For disassembling and reassembling revolvers, this tool helps with the removal or installation of the retaining pin. Works with Ruger, Colt, S&W, Taurus, and H&R Revolvers with a coil mainspring. Also works great on Ruger #1 and #3 rifles. Features a steel blue finish.

Technical Information

Notes: 6.25" long, 1" wide Controls mainspring and strut for retaining pin removal and installation. May also be used for Ruger #1 and #3 rifles.

715675

 

$48.99

Mainspring Housing Pin Removal Tool 1911

This dedicated, purpose built tool is used for driving out a 1911 pistol's mainspring housing pin, and its steel construction with ergonomic plastic handle ensures years of service.

Technical Information

Notes: Use to drive out mainspring housing pin Steel with plastic handle.

478800

Mainspring Housing Pin Removal Tool 1911

CALL

Plunger Tube Support 1911

This tool uses a hardened point to flare the plunger tube legs into the recesses in the frame. Works with most 1911 frames, including Officer. Requires a crescent wrench for use (not included). Support is used to avoid damage to the plunger tube during staking.

Technical Information

Notes: Steel, 4" long, .106" diameter, with step of .3" at .09" diameter Prevents damage to plunger tube when tube is staked to frame.

143231

Plunger Tube Support 1911

$14.99

Rail Swaging Punch Double Rail 1911

Made from machined steel, this punch protects the 1911 rail when making adjustments to the frame.

379696

Rail Swaging Punch Double Rail 1911

$28.99

Rail Swaging Punch Single Rail 1911

Made from machined steel, this punch protects the 1911 rail when making adjustments to the frame.

529852

Rail Swaging Punch Single Rail 1911

$28.99

Revolver Cutter Tool Handle

Tool steel cutter is used in conjunction with a nominal pilot bushing (sold separately) to adjust the barrel to cylinder gap, as well as to square the rear of the barrel face.

Technical Information

Notes: (from the manufacturer) Cutter Tool Handle for ECT/ Revolver Cutter.

636715

Revolver Cutter Tool Handle

$12.49

Round Butt Fitting Guide S&W K, L-Frame, Set of 2pcs

1/4" hardened steel plate lets you change a S&W K or L frame square butt revolver to a round butt model. May require alteration of the strain screw after conversion.

Technical Information

Notes: 1/4" thick hardened steel plate May require alteration of strain screw Pattern allows changing square butt revolvers into round butt type.

263717

Round Butt Fitting Guide S&W K, L-Frame

$23.99

Side Fitting Bar Hooking Feature

Hardened, tool steel bar is used as an anvil inside the frame rails on a 1911. To use, measure the rail thickness on the slide. Then, insert the fitting bar with the same thickness into the frame rails and tap the frame rail gap until it is the correct width to accept the slide. 1" wide x 4" long. Number listed is the thickness of the bar.

719367

Side Fitting Bar Holding Fixture

$23.99

Single Action Gas Ring Stretcher

Stretcher contains sturdy steel jaws that swage and widen the gas ring in front of the cylinder, reducing barrel leading when using lead bullets. Requires a large bench vise for use.

Technical Information

Notes: Steel jaws swage gas ring for a tighter frame to cylinder fit Requires a large bench vise for use Stretcher jaws, support pin with handle and sleeve are included.

119834

Single Action Gas Ring Stretcher

CALL

Slide Micrometer 1911

Micrometer is specifically designed to measure the thickness of frame rails. Measures from .0000 to .4265". 2 1/2" in overall length.

Technical Information

Notes: Measures thickness of slide rails Stainless steel, reads .0000" to .4265", 2 1/2" overall length.

323990

Slide Micrometer 1911

$179.99
Slide Milling Fixture 1911

327842

Slide Milling Fixture 1911

$119.99

Trigger Adjustment Pins 1911

Pins mount to the outside of the gun, allowing the trigger components to be assembled exactly as they would sit in the gun. This allows the engagement surfaces to be easily observed in preparation for stoning or adjustment.

Technical Information

Notes: Tool steel Mount on the frame so that trigger pull and sear engagement may be checked without repeated assembly and disassembly of the 1911.

795641

Trigger Adjustment Pins 1911

$28.99

Trigger Adjustment Pins Ruger Single Action Revolver

Pins mount to the outside of the firearm, allowing the trigger to be installed on the exterior of the frame. This allows the engagement surfaces to be observed in preparation for stoning. Steel.

Technical Information

Notes: Steel construction Used for adjusting the sear and trigger pull.

731060

Trigger Adjustment Pins Ruger Single Action Revolver

$28.99

Trigger Stirrup Die 1911

Steel die slips into the trigger stirrup and is used like an anvil to smooth out the factory stirrup. Produces and maintains the correct stirrup geometry for a perfect 1911 trigger job.

Technical Information

Notes: Use to smooth out production triggers Slide trigger over die, tap around trigger to smooth stirrup.

619774

Trigger Stirrup Die 1911

$23.99

Trigger Track Stone 1911

Ceramic stone is .230" square and 5" long. Designed specifically to remove burrs and machining marks from a 1911 trigger track.

Technical Information

Notes: Fits inside the trigger frame cuts, polishes rough edges Ceramic stone, .230" square, 5" long.

457592

Trigger Track Stone 1911

$15.49

Yoke and Crane Alignment Tool S&W J-Frame

This tool detects any misalignment due to a bent yoke on both Ruger and S&W revolvers. Allows adjustment for more consistent crane lock up and smoother operation.

Technical Information

Notes: This tool allows precision crane alignment Tool is 2.6" long, use on centerfire revolvers.

273068

Yoke and Crane Alignment Tool S&W J-Frame

$28.99

Yoke and Crane Alignment Tool S&W K, L, N-Frame

This tool detects any misalignment due to a bent yoke on both Ruger and S&W revolvers. Allows adjustment for more consistent crane lock up and smoother operation.

Technical Information

Notes: This tool allows precision crane alignment Tool is 3.17" long.

 

594137

Yoke and Crane Alignment Tool S&W K, L, N-Frame

$28.99

Yoke and Crane Reamer .310" S&W k, l, N-Frame, Ruger Six Series

Restore the inside dimension and free up the ejector springs in S&W K, L, and N Frame, and Ruger Six Series revolvers with this .310" reamer. Cleans virtually all rough spots and burrs, and helps eliminate end shake.

Technical Information

Notes: Used to resize diameter and remove burrs and rough patches.

595295

Yoke and Crane Reamer .310" S&W k, l, N-Frame, Ruger Six Series

CALL

Slide Fitting Bars - 1911

Hardened, tool steel bar is used as an anvil inside the frame rails on a 1911. To use, measure the rail thickness on the slide. Then, insert the fitting bar with the same thickness into the frame rails and tap the frame rail gap until it is the correct width to accept the slide. 1" wide x 4" long. Number listed is the thickness of the bar.

Technical Information

Notes: 4" x 1" x thickness listed in description Hardened tool steel For use, measure the slide rail thickness, place slide fitting bar (use closest thickness to measurement) in frame, then press or tap frame rail to close the space to match the slide rail thickness.

Slide Fitting Bar Universal Picture

Description Product # Price
Slide Fitting Bar 1911 - .111"                                                        
187202
$23.99
Slide Fitting Bar 1911 - .112"
653674
$23.99
Slide Fitting Bar 1911 - .113"
394752
$23.99
Slide Fitting Bar 1911 - .114"
163797
$23.99
Slide Fitting Bar 1911 - .115"
967423
$23.99
Slide Fitting Bar 1911 - .116"
159811
$23.99
Slide Fitting Bar 1911 - .117"
290849
$23.99
Slide Fitting Bar 1911 - .118"
418831
$23.99
Slide Fitting Bar 1911 - .119"
754891
$23.99
Slide Fitting Bar 1911 - .120"
191746
$23.99
 

Barrel Cylinder Alignment Gauges

Description Product # Price

Barrel Cylinder Alignment Gauge 22 Rimfire

                                                         

198754

Barrel Cylinder Alignment Gauge 22 Rimfire S&W K-22

$23.99
Barrel Cylinder alignment Gauge 45 Caliber

210976

Barrel Cylinder Alignment Gauge 45 Caliber

$23.99

 


<-Back to top

© Copyright 2008 -- Pacific Tool and Gauge Inc.
PO BOX 2549 - 598 Ave C * White City, Oregon 97503 * 1-541-826-5808 FAX: 541-826-5304